Cart 0



Snowfoam PreWash

The first step to cleaning is to snowfoam the vehicle and let it dwell for 4-7minutes (weather dependant) to loosen off the surface dirt on the vehicle.

Attention To Detail

A detailing brush is used along with shampoo to clean around badges, grills, trims, and all those hard to get to areas.

Bleeding Iron Decontamination

spray over vehicle and watch iron contaminates bleed away in front of your very eyes. Fallout Iron Remover has the chemical ability to help you to remove iron(III)oxide particles from a surface without having to remove them mechanically. These particles are loosened up via a chemical reaction process, that allows for them to be rinsed off safely.


Clay bar is used to remove any leftover contaminates, dirt, tree sap, iron and tar that the shampoo stage doesn't. Clay bar/ Claying removes these contaminants by “shaving” them from the surface leaving the paintwork surface smooth to the touch. If not treated, these contaminants will leave your paintwork feeling very rough to the touch. 

Detailing at its finest

Vehicle Jacked up and on axle stands. All wheels taken off to clean the under arches, suspension coils, brake calipers, arch lining, brake lines and so on. Degreaser and APC (all purpose cleaner) is used to deep clean then coated with plastic and rubber trim dresser to revive them, giving them a new release of life.

Braking Dust

Dedicated wheel cleaners and fallout iron removers are applied to remove brake dust, road debris and other contaminants off your alloys and tyres. Once free of contaminants and dried, tyre dresser and wheel sealants are coated on.


All trims, badges, headlights, rear lights, windscreens, side mirrors, windows are masked up using low residue UV resistant 3M tape and masking paper.


 Paint Correction: Swirl Removal/Gloss Enhancement

Here we have a before and after shot of us removing swirl marks the the bonnet of a Porsche Cayman. A Dual Action Polisher (DA) was used with the combination of a Microfibre (MF) pad and Menzerna 400 Compound to remove the light marks to fully restore the paintwork. As for refining and enhancing, we used ShineMate's Diamond Red pad and Menzerna 3800 to give an extra deep gloss finish

Paint Correction: Swirl Removal/Gloss Enhancement

Nano Polisher used for door handles, pillars,bumper crannies, spoilers and other tight spaces for maximum detailing, because we are perfectionists!

Ceramic Coating: Extra Protection

This is a special edition of CQuartz designed for the colder damper climate, and specially for the UK.

The Cquartz UK Edition Paint Sealant is based on same technology used over the original Cquartz with slight improvements. This version of their coating contains over SiO2 with 99.9% puritythe first ever nano silica coat which has such concentration.

This guarantees long lasting coating with extreme strength resistance and water-repellency. Once the liquid meets the open air it cures and forms diamond hard coating on the surface with extreme hydrophobicity. The Si02 in the coating dries to form a hard anti scratch finish which will help protect the paint against swirls and scuffs.

Beading Art with Wax

Nice big, tall beads are visible and very very round. This indicates that the paint is well protected, giving a deeper, glossier, in depth shine! Water behaviour is emense, and when it starts raining, which your car bead away.

Finishing Touches

Interior given a fresh look with dressers which includes dashboard, door cards, glass, centre console, seats and carpets. Carpets and floor matts are hoovered and wet vacuumed then finished off with some stylish stripes. 





how to find us